M-Lytic AG Series
MLGO (Glue-On) & MLSI (Snap-In)
2-Pole Electrolytic Capacitors
MLGO Glue-On (new) & MLSI Snap-In (old) Electrolytics (featuring Black Titanium Cathode)
NOTE: Mundorf is converting over "all" SI caps to the new GO configuration...the GO types have the same terminal spacing as the SI, but the lead material itself is vastly superior (tinned OFHC copper...non-magnetic; instead of clad steel for the SI)
The Black (Titanium) Cathode coating is remarkably impressive at both measurements and music performance. The Titanium coating replaces the ordinary aluminum oxide coating (dielectric) in order to avoid the electrolyte being the cathode for the anode foil and, that the electrolyte operates as anode for the aluminum contact foil, simultaneously. Our Black Cathode electrolyte capacitor really does feature a separate cathode foil enabling super fast and almost loss free ion movement for reduced ESR, distortion and 'noise' to the utmost lowest level. These positive effects are similar to (but much stronger) graphite modified electrolytics (like Black-Gate).
With the MLytic® Audio Grade series we are extending our range of products to a series especially conceived for applications within pre-amplifiers or small power amplifiers.
The assemblage always refers to snap-in models for assembly boards.
Throughout its development, importance was placed upon attaining low ESR and ESL values, as well as, a low inner-sound development.
- Long lifespan
- All contacts welded
- Compact size
Temperature range: -40ºC... +85ºC
Max. reverse voltage: 2V
Leakage current 5 min. @ UR:0.007 * C [μF] * U [V] + 6mA
Leakage current 1 h @ UR: 0.15 * leakage current 5 min @UR
Specs.: DIN 41332 IEC 384 - 4
Insulation: Heat shrinkable tubing test voltage 3 2 500 VAC
Terminals: Snap-In (Migrating to Glue-On)